HP Officejet 6812 Printer setup - 123.hp.com/setup 6812
123.hp.com/setup 6812 - Initial HP Officejet 6812 setup
- First, take your printer out of the package box. Set aside all the manual papers, power cord fax cord, driver installation CD, adaptor, and other paper books about your printer.
- Then, pick out the covers that include HP Officejet 6812 and remove the plastic cover. Then remove the Styrofoam on double sides.
- Next, pull out the blue strips lightly around your printer. Open the scanner cover and remove a piece of plastic sheet and close the scanner cover.
- Presently go to the rear of your printer and push the two buttons on two sides of the duplexer it comes out of, remove the blue strips and any packing materials inside and place the duplexer rear in its slot.
- You can find a plate size part that came along with the package. Attach it with the paper plate and adjust the paper width guide.
- There is another output plate that raises all the plastic around them and you can find two tabs pushing it in the paper plate that can simply be attached to your printer. For detailed information please visit HP Officejet fax 6812 setup
Download software for HP Officejet 6812
- From your printer control panel touch, the wireless symbol then presses settings presently Wireless Setup Wizard.
- In the following screen select your network name and next, type your network password. Presently the printer is connected to the wireless network.t
- The software installation needs a USB cable to be connected to your printer and the PC. You can remove the cable after placing the software.
- Drive to 123.hp.com/oj6812 and tap the printer and type the model name and model number.
- You can do any wanted changes such as changing the OS and tap submit. In the next screen choice such as full software package and primary drivers show. Select the needed package and tap download.
- Install the package and follow the guidance to finish the software package installation method.
HP Officejet 6812 Printer Setup - 123.hp.com/oj6812
- Initially, take out the power cord and power module and unroll them. Connect one edge of the power cord to the power module and the other to your printer power output.
- Then, connect the module directly to the wall socket. Raise the shows and tilt it up to your advantage. Next, press the power button, the printer starts first and it takes a few moments to set up.
- Presently select language, region, and tap OK. In the next step, the printer helps to install the ink cartridges. Open the cartridge access door and wait for some moments for the carriage to come to the access area.
- Then HP Officejet 6812 helps to place the paper in the output plate. Open the paper plate and fill it with a jam of fresh unused paper.
- Use the paper width lead to adjust the paper and put it in place while printing. Presently touch next in your printer display.
- The printer arranges and prints the arrangement page. Downloaded the printer software from HP Officejet fax 6812 setups. Clear the printer problems and printer setup errors from 123.hp.com/oj6812.
How to use Printing Solutions?
How to print with ePrint?
- First, press the HP ePrint button from the show and touch setup then go along with the help to allow the web service.
- For printer drivers for HP Officejet 6812 visit 123.hp.com/setup 6812 and download the proper package.
- Then print the web info page where you can find the mail id.
- Get your phone or PC and open the mail application. Compose a mail and in the “To” field type the printer’s mail id.
- Lastly, Attach a document or images that need to be printed and tap send. For printing webpages, open the web page that wants to print, copy the content and paste in a report and send the document to the Printer mail id for printing.
How to print with the HP Smart app?
- Place the application from 123.hp.com/setup 6812. Presently connect the phone to the same wireless network as that of the printer.
- Next, open the application, add your printer if your printer is not listed, tap plus symbol, and add your printer name.
- Print stored pictures and also photos and documents from cloud services using this application.
- On the desktop of your application ensure your printer name is there and click any tile to print.
How to use Apple AirPrint?
- Initially, connect your wireless HP Officejet 6812 printer to a wireless network and connect the iOS device to the related network.
- Then open the report and photo that wants to be printed and tap the share icon. Presently tap the print icon.
- Select the printer tab next, select your printer name and adjust your printer settings. Presently click Print. Verify 123.hp.com/setup 6812 to update print quality with AirPrint and to solve printing problems.
WI-FI direct printing setup
WI-FI direct printing setup - In windows
- If you are guest printing or there is no local network ready for you can use Wi-Fi Direct for printing purposes.
- First, switch ON your printer, then from your PC tap start, and in the search bar enter Printers and Scanners.
- Then, choose the printer settings from the result and tap the plus symbol with Add a printer or scanner in it. Presently the screen refreshes and searches for printer and scanner.
- Next tap the “Show Wi-Fi direct printers” link. Then select your printer name from the list and your printer name must start with Direct in the front.
- Presently tap Add Device and verify the 123.hp.com/setup 6812 printer display. Keep in mind that the pin must be entered in the window within 90 seconds.
- Next, note down the 8 digits pins shown to your printer, and in the WPS pin window type the WPS pin of HP Officejet 6812 and tap next. Presently your printer is added to the list. Proceed with your print job
WI-FI direct printing setup - In mac OS
- Initially, tap the wireless icon in the mac Operating System and choose your printer name right in front of its name.
- In your HP Officejet, 6812 printer control panel tap wireless symbol then press reports and select Network Summary to find the network name and network summary.
- Next, type the WPS pin of your 123.hp.com/setup 6812 printer. The next click joins in the prompt.
- Presently open the photo or document you need to print, go to File, and tap print.
- Select your printer name and adjust the print settings in the following help and tap print.
- If you get any error message such as Driver Unavailable as the setup kindly install or update the newest version of your printer software from 123.hp.com/setup 6812 or HP Officejet fax 6812 setups.
123.hp.com/setup 6812 - WI-FI direct printing setup
Wi-Fi direct print job failing problem
- Verify your printer is enabled with the Wi-Fi direct characteristic.
- To switch ON this go to your printer control display and touch the Network menu then choose Wi-Fi direct and select ON or OFF from the choice.
- Update the newest printer software firmware from 123.hp.com/oj6812.
- Remove any USB or Ethernet cable connected with your printer.
- Restore the default network setting of your printer. Press the wireless icon from the show and tap the setting icon and choose Restore Network Settings.
Modifying the printer name and Wi-Fi Direct password
- First, connect your Wi-Fi direct printer with your PC. Next, enter the IP of your Embedded Web Server(EWS) in your browser and tap Enter.
- Next, tap the Network tab in the following window and tap Wi-Fi direct choice from the sidebar, and tap status.
- Follow the on-screen guidance and tap Advanced and select to Continue to (IP address).
- Tap Edit Settings in the Wi-Fi Direct Status Screen and do the changes and tap Apply.
Resolving No AirPrint Printers Found message
- Check whether the AirPrint characteristic is allowed or not. Type the IP address of your printer in the browser of your Apple device and enter.
- In the EWS screen tap network and next AirPrint and next Status. Then tap OK in the Redirecting to Secure Page.
- And in “This connection is not a private window” tap“visit the website link” and verify if your AirPrint is allowed or not on the following page.
- Then, verify your iOS system is connected to the same network or various networks.
We are an established third-party technical support team, we are not at all associated with any other party or company directly. We sincerely respect other company’s brand names, and logos as well as products. We assure you that these are used at our interface only for reference purposes, these do not relate to any category directly. We are totally independent company and we maintain the work and support as a third party only.